System Components
UVT-BUV-18-32ADV
Performance:
- Electronic ballast, rapid start
- Type 1 Class A sound rating
- 18-32 VAC, 50/60Hz, NPF
- 4 foot long wire terminated on 4P Gaynor socket (standard) can be extended up to 25 feet with optional remote kit
- Short Tabs: 3.35” L x 2.43” W x 1.40” H (8.51cm x 6.17cm x 3.56cm)
- Long Tabs: 4.35” L x 2.43” W x 1.40” H (11.05cm x 6.17cm x 3.56cm)
Safety:
- Class P
- Internally fused to protect power supply
- Self-resetting internal thermal protection
Features:
- Wide range of operating voltages: 18-32 VAC, 50/60 Hz
- Four flexible tabs allow for the ballast to be mounted in any position
- Small size, high performance, cost-effective design
- Designed to match the unique operating characteristics of UV lamps
- Fully enclosed aluminum housing is safer, sturdier and more immune to electrical noise than plastic housing normally used in comparable ballasts
- 105˚C aluminum electrolytic capacitors ensure years of trouble free operation
- Supplied with 4 foot long wire terminated on 4P Gaynor socket can be extended up to 25 feet with optional remote kit
- Long/short mounting tabs available
- Advanced 8 bit RISC microcontroller monitors vital functions in addition to:
- Keeps track of lamp usage time
- LED indicator for lamp replacement (~8,760 hours)
- Reset push button allows resetting of lamp replacement indicator unlimited times
- Intelligent software algorithm for lamp replacement retains hours of use in the absence of power for up to ten years (non-volatile)
- 6 Function LED flashes to indicate the operating state of the ballast:
- Number of flashes:
- 1 Low voltage detection
- 2 High voltage detection
- 3 Lamp Expired
- 4 Bad Lamp
- 5 Continuous On: Normal Operation
- 6 Off: Replace Ballast